Overview

Allegro™ is an economical addition to the GE Interlogix family of
security systems. Allegro offers up to 20 zones of burglary and fire
protection. With a built-in keypad and siren that is capable of 85 dB,
Allegro is well-suited for multi-family buildings, such as apartments.

Outstanding Features

The panel comes standard with 20 zones, one of which can be a
hardwired supervised zone. The built-in radio receiver works with
most Crystal or SAW Learn Mode sensors.

Enhanced Monitoring

The Dialog™ Telephone Interface Module (DTIM) is a battery
operated communication link between the control panel and the
central monitoring station. The DTIM receives radio signals from the
panel, then uses the phone line to report security system events to
the central monitoring station.

The DTIM provides added security by separating the telephone
interface from the panel. If the panel is damaged during a break-in or
fire, the DTIM can still report to the central monitoring station.

The DTIM is a supervised device that transmits supervisory signals
every hour for the panel to receive. When the battery is low, the
module transmits a low battery signal.

Effortless Programming

System programming can be done on-site from the panel using the
built-in keypad, or off-site using ToolBox® downloader software
(version 5.7 and later).

Standard Features

• One supervised hardwire zone
• Up to 20 sensors
• Supports Crystal and SAW Learn Mode sensors
• 4 user programmable access codes
• SIA or CID central station reporting formats
• Event buffer with time and date stamp
• Built-in radio receiver/transmitter
• Built-in siren capable of 85 dB @ 3 m
• Built-in panel keypad
• Liquid Crystal Display (LCD)
• On-site or remote programming